AK-Dosier-Mischtechnik



Two-component dosing equipment:
Type MD




  compact

    easy of maintenance

      wear-resistant
Type: MD
These dosing units of the serie MD are of rigid construction and designed for permanent duty. They are equipped with wear-resistant component parts for heavy duty purposes. These component parts permit simple servicing and greatest ease of maintance. On normal operation, the time required for maintance is 1/2 hour per week. Two-component materials, such as PUR resins, PUR foam, epoxy resins, silicon pourable sealing compound etc. can be processed.


Technical Data: (Typ MD):
  • Dimensions: L x B x H ca. 790 x 400 x 800mm
  • Weight: Approx. 40 kgs
  • Dosage: Via two precision geared dosing pumps
  • Output:
    Smallest output of approx. 1.3 cm³/rotation. Highest output of approx. 12 cm³/rotation. Output via two equal ball valves to open by one common hand lever.
  • Drive:
    Via three-phase reduction motor of 400 volts, 0.18 kW, 33 r.p.m. Forced interlinkage of the two dosing pumps
  • Material storage:
    2 x 5 ltrs. polyethylene-made tanks for the A and B components




 
Two-component dosing equipment:
Type MDM




  compact

    easy of maintenance

      drop-free

        wear resistant
MDM
These dosing units of the series MDM are of rigid construction and designed for permanent duty. They are equipped with wear-resistant component parts for heavy purposes. These component parts permit simple servicing and greatest ease of maintenance. On normal operation , the time required for maintenance is hour per week. Two component materials, such as PUR resins, PUR foam, epoxy resins, silicone pour able sealing compound etc. can be processed.

The most outstanding advantage of this 2-K-dosing/mixing equipment series lies in the fact that the two components are fed separately from their two dosing pumps and the mixing adapter, into the mixing tube. The two components come together at the beginning of the mixing tube. The mixture is carried out by disposable plastic-made mixing tubes or, upon request, a static mixing element (stainless steel, make SULZER).


Technical Data (Type MDM):
  • Dimensions: L x B x H ca. 790 x 500 x 800mm
  • Weight: Approx. 35 kgs
  • Dosage: Via two precision geared dosing pumps
  • Output: Min. approx 1,3 cm³/per round. Max. approx 20 cm³/per round - or up to 2 Ltrs./minute (depending on the materials). Output via two equal ball valves to open by one common hand lever.
  • Drive:
    Via three-phase reduction motor of 400 volts, 0,18 kW, 33 - 105 r.p.m. Forced interlinkage of the two dosing pumps
  • Material storage:
    2 x 5 Ltrs. polyethylene-made tanks for the A- and B- components (standard) or Pre-pressure-tanks (diverse sizes)




 
Two-component dosing and mixing plant (rinsing agent-free):
Series MDS




  compact

    easy of maintenance

      drop-free

        rinsing agent-free
Serie: MDS
The most outstanding advantage of this 2-K-dosing/mixing equipment series lies in the fact that the two components are fed seperately from their two dosing pumps and the mixing adapter, into the mixing tube. The two components meet first at the beginning of the mixing tube. Mixing is carried out by disposable plastic-made mixing tubes or, upon request, a static mixing element (stainless steel, make SULZER).

In the eventof a stainless steel mixer, the mixing element has to be cleaned by hand at the end of working, however, this is not time-consuming. A vacuum withdrawing device is provided at the mixing adapter in order to ensure the drop-free casting and to prevent the after-dropping. These series MDS are of rigid construction and designed for permanent duty. They are equipped with wear-resistant component parts for heavy duty purposes. These component parts permit simple servicing and greatest ease of maintance. On normal operation, the time required for maintance is 1/2 hour per week. Two-component materials, such as PUR resins, PUR foam, epoxy resins, silicon pourable sealing compound etc. can be processed.


Technical Data (Series MDS):
  • Dimensions: L x B x H ca. 790 x 650 x 800mm
  • Weight: Approx. 40 kgs
  • Dosage: Via two precision geared dosing pumps
  • Output: Depending on the pump pair from approx. 60 to 500 cm³/min.
  • Drive:
    Via three-phase reduction motor of 400 volts, 0.18 kW, 50 r.p.m. Forced interlinkage of the two dosing pumps
  • Material storage:
    2 x 5 ltrs. polyethylene-made tanks for the A and B components
  • Mixing unit, consisting of:
    Mixing adapter housing, two injection jets provided with closing mechanism, vacuum withdrawing device to prevent after-dropping, disposable static plastic-made mixing tube.(Against extra price upon request: SULZER mixer, special steel construction and pistol design.) Electronically continuously settable shot time; pot life monitoring.

   Technical modifications reserved.


I M P R E S S U M

AK-Dosier-Mischtechnik     P.O.-Box 1340      D-53760 Hennef     Germany      Phone: +49 (0) 2242 869940     Fax: +49 (0) 2242 869941

[ <- Home ]         [ deutsch ]         [ english ]         [ Home ]         [ mail@ak-dosier-mischtechnik.de ]         [ MDSP/MDD -> ]

Web-Design by M.Heiligers (www.heiligers.de)